We have an old Cisco 6509 with 2 x Sup-720w/MSFC3 running 12.2(18)SXD6.  IOS version is pretty old, and Cisco's software download section doesn't even have it in the list anymore.We would like to upgrade IOS to the newest/latest, but we're not sure w...

Hi,When i was reconfiguring the ip address of my ACS applicance using "SET IP" command, it failed to assign ip address, i rebooted the appliance since then whenever i try to configure ip address on it using "SET IP" address command, it gives me follo...

I wonder that can we configure Time based Static nat i.e During Office hours my private IP to be natted to a Public IP but after office hours the IP should be natted to a diffrent public IP ? is it possible any ways ?

Hi My ACS accounting doesn't show the Logs for commands executed . As per me, it should be under "TACACS Administration" Tab. But its blank.. Please let me know what is the problem causing no accounting for Authorized commands.Below is the configurat...

Hi,I am testing multicasting on FWSM wherein sender is at inside (VLAN 10) & receiver is at outside (VLAN 203).Both VLAN 10 & VLAN 203 are not on MSFC and they are L2 Vlan on 6500 switch.please suggest what shall i do on FWSM and MSFC to configure mu...