About john-huntington

john-huntington · 08-04-2011

I'm using a stack of four SGE2000P switches for a PoE video camera system. I've got the cameras in a VLAN and everything's working fine. I'm wondering, though, is there a way to find out what data rate the stack interfaces are working at (since it'...

john-huntington · 08-03-2011

I do a lot of work with switched, private networks (for industrial control), but very little with routers. I'm trying to pass the CCNA but failed the routing parts. So, my friend gave me an old 3600 router, and I'm using a SGE-300 switch running CL...

john-huntington · 07-28-2011

I've tried a bunch of stuff, and searched through all the discussions here, but I'm stumped. I'm setting up a closed, private industrial control network (for a haunted house, believe it or not), and I have four SGE2000P's in stack mode. all configur...

john-huntington · 08-07-2011

Cool, I use Wireshard a bunch, will try to mirror the port on the server.I'd still like to see the status of the stack ports, though. I have the switches spread around our venue using wiring we installed, so I'm hoping the stack ports negotiated up ...

john-huntington · 08-03-2011

FYI, we tried various things on the tech support chat, who were very helpful. But we were not able to resolve the"Cannot apply due to lack of HW resources." issue, so the case has now been escalated up the chain...John

john-huntington · 08-03-2011

That's my second Homer-Simpson D'Oh! of this process, thanks! I had the default gateways still set to the management addresses of the VLAN's in the switch. I changed that and it worked fine! Now I'll try to add another router and get a protocol go...

john-huntington · 08-03-2011

Oh and I forgot to mention that I tried to establish static routes, but they either didn't seem to do anything, or gave me an error like "can't use an IP address on this router".Thanks!John

john-huntington · 07-29-2011

I did a bit more experimentation, and it seems to be related to having too many entries. I tried an ACL that has:permit 192.168.115.0 0.0.0.255deny allAnd that worked fine. I then added one line:permit 192.168.115.0 0.0.0.255permit 192.168.116.0 0....

Member Since	‎07-03-2011 06:32 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12

User Statistics

User Activity

SGE2000P Stack Interface Utilization Percentage?

Stupid Newbie Routing Question

SGE2000P Stupid Inter-VLAN Routing Question

SGE2000P Stack Interface Utilization Percentage?

Re: SGE2000P Stupid Inter-VLAN Routing Question

Stupid Newbie Routing Question

Stupid Newbie Routing Question

Re: SGE2000P Stupid Inter-VLAN Routing Question