Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am trialling VPLS with BGP autodiscovery, using the configs supplied at http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpls_auto_bgp.htmlANDhttp://www.cisco.com/application/pdf/en/us/guest/tech/tk891/c1482/ccmigration_09186a008...
Hi, is it possible to build a carrier supporting carrier MPLS network for a customer wanting to be able to provision separate vrf's at the edge, whilst also providing encryption with Group Encrypted transport inside the internal carrier cloud?
I have been able to resolve this issue in our network today. Turns out that I had setup ACS with a DHCP scope that was conflicting with the windows domain DHCP. Clients logging on were being assigned addresses by ACS that were already being used by a...
The uplink is not a port channel.TAC have responded by saying that VPLS is only supported on the OSM-type interfaces?We planed on using the uplink ports on our Sup720-3BXLs.
