Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello,any body can tell me what the command should be used to find codec debugging like this command:debug isdn q931i need special one for debugging codec....BR.
Dears,my company provide DIDs in range 63xxxxxx but this exactly same number for Phillipines Fix 63 in my CDR there is a conflict between Phillipines Fix 63 and my DIDs 63xxxxxx i need to Distinguishes between them i have my AS5400 and PGW2200 ... ho...
Dears i had configured my AS5400:aaa authentication login default local group radiusaaa authentication login h323 group radiusaaa authentication ppp h323 group radiusaaa authorization exec h323 group radius aaa authorization network h323 group radius...
yes exactly 55.55.55.21 is raduis server and 55.55.55.49 it is my AS5400.i have FW is located between them and i used these ACL lists:access-list 100 extended permit tcp any host 55.55.55.21 eq 1812 access-list 100 extended permit tcp any host 55.55....
ok is this normal or it is error in the configuration of AS5400 device?but my raduis server is configured with port 1813 not 1646.what your suggestion for my AS5400 configuration to send AAA packet with only port 1813?BR,
hi Shawn,hust use those commands:dial-peer voice 5 pots destination-pattern 011T port 0/0/0:23 prefix 011 don't have to add translation rule for this dial peer for international calls?if yes what best solution suggested for this translation rule.BR.
dear, thank you for help i did max-conn command before but i thought there is command for hunt group... no problem... now i have this issue: i did at my AS5400: VoiceGateway#sh voice call status CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers ...
