Anyone have any idea why my 3620 will not work with a NM-2FE2W or a NM-16ESW, but works fine with a NM-4E or NM-2E2W under any featureset/rev of the 12.3 IOS?
Anyone able to send me the VDM 1.2 software, I know it is no longer supported and "use at your risk" but I would like to use it on my 2612 since the 2612 is not supported by SDM like my 3620.
I know what supports VDM. What I can't get anymore is VDM itself. It is (was) a free (at least toward the end it was) download, but it appears to no longer be available from Cisco.
It sounds to me like what you really want to do is add another entry to the crypto map. Just have it use a different "group" or different certificates if that is how you setup your vpn. Then, you can set up a completely different ACL which allows V...
The "trick" that you are probably missing if you have got the boxes establising tunnels is that you most likely set up your ACL for the crypto map as symetric.If you set it as "access-list extendec permit ip "without adding the reverse route, it wi...
