Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a DX80 video endpoint that could not make calls but could receive them. The DX80 showed registered in the CUCM.
Other 88xx model phones and PDA-based Jabber worked fine via MRA.
We are running CUCM 10.5.2 and Expressways x8.7.2. The DX80 has ...
Can't say I have seen this before but SSH is easy to do on the ASA.I recommend taking the access list off of the interface first to see if that could be it.You only posted a partial section of the config but make sure you have the SSH command with th...
Chris, it appears you need to make a cable that has "straight-thru" data but "crossover power" looking at your wire color description.I would suggest using two jacks with 24gauge wire between them instead of trying to crimp the RJ45 connectors for ea...
I have never used pptp but I discovered the command "isakmp nat-traversal 20" when I could not see my computer on the local side of the pix when I was attempting a connection behind another firewall.If I had a public IP address my access worked witho...
I suffered with the inability to tunnel back to the house for months from the office with my PIX501. Finally found the command via Google so it sticks in my mind.The command is listed in the docs but my fresh CCNA certificate at the time didn't help...
Reminds me of a NAT traversal problem but you said client to server communications work OK.Not familiar with v7 yet but I had to add "isakmp nat-traversal 20" to my config to allow access from behind a firewall.Can you post a scrubbed config for a lo...
