Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have a topology:
INSIDE: 192.168.1.0/24
OUTSIDE: 200.200.200.1/27
DMZ: 192.168.200.0/24
INSIDE hosts are NATed to OUSTIDE ip address (200.200.200.1)
In DMZ I have a server with address: 192.168.200.200 wich is NATed to 200.200.200.2
My...
Hi, my configuration is like this: I have two ISPs: Primary and backup. What I want to do: I'm receving default routes 0.0.0.0 from both ISPs. This is working fine on Cisco 3560.I have made a static route on 3560:DMZ_IP_ADD DMZ_SUBNET_MASK 10.100.10...
Hi. I have configuration like in the attached picture. I have 2 ISP. Both are sending me default route 0.0.0.0 to the Internet. ISP1 is primary, ISP2 is backup.BGP is working fine on 3560, I can see those routes. But the traffic from VLANs first sho...
Hi, I have a problem with my RA VPN L2TP on ASA ver 9.6.
I have created an VPN L2TP over IPsec connection using a wizard. I can connect, I get an IP address, but I'cant reach internal resources.
I can ping all host in INSIDE network but can't connec...
Hi. I've noticed that my IPS is blocking this: Novell ZENworks Desktop Management TFTPD Code Execution: sig ID:36790It also signalling that I am an attacker.Two Linux machines and one Windows Server 2008 R2 are classified as those attackers . Does ...
Thx for your reply.OMG I'm so stupid... I will modify ACL. Second thing: what I mean writing this: "P.S. I don't want to use ASA as the endpoint for ISP links." was that I want to terminate physical connection from ISP on 3560 not on ASA. Cloud "out...
Ok. I've did it but in diffrent way. I've made a new DHCP pool at remote rtr with DHCP option 43, must be in hex ! more information here: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml
