Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, We have a cisco 1721 having one "FastEthernet 0" and one "Eth 0" interfaces; connecting a DSL line to our internal LAN.FastEthernet 0 interface is connected to the DSL line via ADSL modem (Zyxel) which is configured as bridge mode.Eth 0 is con...
Hello,We have a cisco 1721 having one "FastEthernet 0" and one "Eth 0" interfaces; connecting a DSL line to our internal LAN.FastEthernet 0 interface is connected to the DSL line via ADSL modem (Zyxel) which is configured as bridge mode.Eth 0 is conn...
sh run Building configuration... Current configuration : 1942 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! boot-start-marker boot-end-marker ! no aaa new-model ! res...
Ivan,There is no "set peer 130.x.x..44" configured in the above mentioned sh run details.We are actually looking to configure IPforwarding (request comes from 130.x.x.49 has to be forwarded to 172.16.0.6 without bring down any other configurations(IP...
Hi Ivan,Thanks for your prompt response.Zyxel does not have any configurations exists,it's configured as bridged mode as an ethernet converter,converting RJ 11 DSL line to RJ 45. yes,130.x.x.49 is the public IP of our server.yes,130.x.x.49 address kn...
