Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
User is going to place a "three leg" 5505 ASA on site's existing LAN.Two PCs, one in each firewall's DMZ and PCN network will use a NAT'ed IP address that is on site's LAN.Question is: will the site's core layer-3 device require a "reverse" route poi...
Is there a Cisco VPN solution that supports remote sites no having defined/assigned static WAN facing IP address, that allows remote site to VPN peer with a VPN Server-Hub? The VPN Server would a 7200 router. VPN Server permits remote sites via 0.0...
Requesting help with verifying what IOS codes support embedded packet capturing EPC utility other than 12.4(20)T and 12.2(33)SRE codes? so far, only found URL:http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_packet_capture_ps6441_TS...
trying to build a Policy NAT for internal source nework 172.30.243.0/24 to be NAT'ed 10.249.44.0/24 when attempting to access destination external 10.102.1.0/24 networks. packet-tracer shows 172.30.243.0 hosts getting NAT'ed to different global-NAT ...
hi Jouni,I have the NAT policies between DMZ and PCN hosts configured and tested. It's the remote user outside of the site who is attempting to reach the one DMZ host's 192.168.101.2, NAT'ed to 10.10.10.6, IP address that I am concern about.Because...
