Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco 2801 that is located at a Branch Office with out IT support staff on location. I would like to update the IOS to the latest release remotely however I am just short of having enough space for both the previous version of the IOS and th...
We have recently upgraded the firmware on our ASA 5510 to V7.2(1) and have had some issues with this Inspect ESMTP command. Prior to the upgrade, it used to Terminate SMTP connections that it considered Malicious, which was fine as it appeared to be ...
Hi All,I am receiving a number of errors on my Cisco ASA 5510 device that reads: 106016: Deny IP spoof from (127.0.0.1) to x.x.x.x on Interface Insidex.x.x.x is some random IP Address. There are a number of IP Addresses that are reported. Any ideas?
Hi There,We have a ASA 5510 that has 2 internet connections and one inside network connection. It has been configured so that one Internet connection is used for all our Internet Usage and VPN usage. The second internet connection has been configured...
Hi all,We have a Cisco ASA 5510 device, without the Security Plus License. We had all our Internet connectivity/VPN terminating on the main internet connection on the Outside1 interface. We now want to set up a second internet connection, that is pra...
How do I know for certain that we don't need SSLClient? We do not use the SDM or HTTPS access for the router, and this router does not use any VPN or Remote Access. This router purely translates data from our ethernet network to an ISDN network.
I am aware of some bugs regarding the inspect esmtp, and had been given 7.2(1.17) from Cisco which resolved the issue of our ASA reloading automatically, but it has not resolved this issue. I had considered running a later version of the ASA software...
Thanks! We have successfully upgraded to 7.2. I have also tested the Link posted about setting up the use of a Backup ISP. It cuts over to the second static route for the Backup ISP fine... but the problem now is NAT. I get translation errors. And wh...
Thanks! This is somewhat helpful. From what I have found the MAC address is of the ISA server (which is the only thing that connects to the Inside interface of the ASA... no surprise really) but why?The packet capture shows that the source IP Address...
