I started a RME Inventory EoS/EoL Hardware Report on devices and got the appended error log. Cisco.com and proxy authentications seem to work well. Any idea how to solve this problem? Thanks Wolfgang ... View more

Hello, is it still necessary to purge the files in D:\apps\CSCOpx\files\rme\dcma\difffiles periodically in LMS 3.2? Can they still be deleted without causing problems? We've got the problem of growing filespace in D:\apps\CSCOpx and I remember this solved a similar problem in LMS 2.5.1 Thanks in advance Wolfgang ... View more

Hello, I changed the transport protocol for images from tftp to scp only. In Common Services, Server Admin I have defined a scp user and password. The ip scp server is enabled on the network components. Now scp works well from the command line of the switch in both direction to and from the CiscoWorks Server. In RME Software management, Software Repository, the download of Images via scp works well. The upload in RME Software distribution fails, here is the log:   JOB ID - 1727 SUMMARY                         --------------------------------------------- Device Name : c356005xxzz Software upgrade result - Failed Total number of devices scheduled for upgrade : 1 Number of devices upgraded : 0 Number of devices failed : 1 Total time taken for Job - 7 Minutes 20 Seconds Status of Job - FAILED ----------------------------------------------------------------------------------------------- Starting Job: ID - 1727 Job Started At : Tue Jun 08 14:45:32 CEST 2010 Job running on : SIZZ0000.zzintfeld.net Upgrade Mode : Parallel Reboot Mode : Parallel Protocol Order for Image Transfer : SCP Protocol Order for Config-operations : SSH,SCP Total number of device(s) to be processed : 1 -------------------------------------------------------------------------------- Processing Device : c356005xxzz Start Time : Tue Jun 08 14:46:42 CEST 2010 Device is locked for exclusive access. The supported protocols for image transfer are: SCP Connecting to the device using SSH... Connected successfully. Sufficient free space is available on flash to copy the image. Retrieving configuration file from the device... Current device config is copied to D:\Apps\CSCOpx\files\rme\jobs\swim\1727\c356005n0zz_Config Checking if HTTP server is enabled on the device... Http Server is not enabled, will continue with Software Upgrade Operation. Copying c3560-ipbasek9-mz.122-46.SE.bin from Software Repository to scp-specific directory. Copied successfully to D:/Apps/CSCOpx/temp/rep_sw_5918160919176062293 Loading image file to flash device : rep_sw_5918160919176062293 --> flash:c3560-ipbasek9-mz.122-46.SE.bin using SCP Error loading image to Flash. See D:\Apps\CSCOpx\files\rme\jobs\swim\1727\c356005n0zz_telnet.log for the output from the device on which the image transfer failed. Image Copy Operation Failed Device is unlocked. Device Upgrade Result : Failed End Time:Tue Jun 08 14:50:43 CEST 2010 -------------------------------------------------------------------------------- In the syslog of the switch, the following message appears: .Jun  8 14:51:15.676: SSH2 1: alloc 37888 not supported The scp image transfer only fails in direction from the cisco works repository to the switch. A " copy scp: flash:" with the scp user from the switch command line works well, the file is copied from  the home directory of cisco works. In the log above, RME copies the file temporarily in a temp directory under this home directory. Any idea how this could be solved? Thanks in advance. Wolfgang ... View more

Hello, we use LMS 2.6 with CS 3.0.6 and SNMP v1. A small part of CiscoWorks's SNMP requests cause Authentication errors on network devices which are correct when I test the device cedential verification. A sniffer trace shows some malformed packets with SNMP community names of the form community@21 with suffixes @nn. All other packet contain the unchanged community name and are working well. Any idea how we can fix this? Thanks in advance Wolfgang ... View more