Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I know this is probably an easy question and please dont jump all over me. I have been messing with an asa 5505 applicance. I would assume you can change the vlans from vlan 1 inside and vlan 2 outside to whatever you want. If I am not able to do tha...
I want to know if my idea behine adjacencies in OSPF are correct. In a broadcast multiaccess network, is the calculation 2n-3? This the the way I came up with the formula:With a DR and BDR on a network consisting of n (>=2) routers, there are 2n-3 ad...
So my kid was playing around and pulled the CF out of my 2801 router. It is a router I use at home for testing purposes. Well now I am getting an error Illegal MAC when I try to use rommon to tftpdnld a new IOS. I have also tried xmodem without succe...
I have a problem with an 1841. I get to here:A summary of U.S. laws governing Cisco cryptographic products may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.htmlIf you require further assistance please contact us by sending email toe...
Jouni,Thanks for the response. If I am reading your reply correctly, (I have a base License) then I can just remove vlan 1 and rename it vlan 20 and put the correct parameters correct? Or is that not a good practice? Thanks
Martin,Again please take what I stated before. Also just looking at the first router IP addressing, you need to make sure all addressing is correct. I can see from the first router there are a couple of IP addresses that are wrong. When you are worki...
Martin,Some of the things you want to look at, from just a quick peak, is the connection types. Make sure you have the right types of connections to the devices. Others include IP addressing and the EIGRP and the area ID's.
So through trail and error I was able to manipulate the cookie to finally work on my machine. This address helped tremendously. https://learningnetwork.cisco.com/thread/23693I did have to make up a MAC address but I used this address http://standards...
