Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are in the 409 area code, and we use 7 digit dialing for local calls. Is it possible to strip the area code, and add a 9 to the call so that these numbers can be dialed from the missed calls list?
We have 20 locations that each have a 2851 router that is used only for SRST and 911. Is there a way to import those using BAT, because its very tedius to do that one at a time?
I have a 2851 router that lost the compact flash card today. The current rommon version does not support the usbflash, so I have been trying to update the rommon version. on different sites I have read that you use tftpdnld -u to upgrade that, but...
On Tuesday, I upgraded WCS and 7 WLC 4404 from version 4.0.216.0 to 4.1.185.0. Since then about 250 1131 access points have not come up. I reloaded the configs to all of the controllers from the backup that I did before the upgrade, but they still ...
Well, I ended up doing this in a round about way. I found a smaller IOS file that was only 18 megs instead of 34 megs, and used tftpdnld -r and got it to boot into IOS, so I could upgrade the ROMMON. Unfortunately the flash card wouldnt format, so ...
Ok I managed to get just about all of the AP's back up. It seems to be a mixture of several problems. I reset the time on all the controllers, because for some reason they were all 1 hour off, even though the ntp server has the correct time and the...
