Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running 9.8(4)26 on a FPR-2130 and hit this bug. So the affected version is wider than stated by Cisco. What version does not contain this bug either Newer or Older code? I am trying to determine what my options are for changing to different c...
I am trying to upgrade all my firewalls to Security Plus but I am not sure what firewalls are needing the upgrade. Is there a SNMP pull I can do to see what license is on my firewall? example: "This platform has an ASA 5510 Security Plus license." ...
I am trying to create redundant cores, the problem I am having is with my VOIP routers. I would like to have each router physically connected to each core while having only 1 IP address. My testing will be to alternately shutdown 1 core switch at a...
I am trying to send out a route via ospf so I don't have to put static routes on all my routers. The destonation address is an external IP and not currently advertized via ospf. I though the route-map would do this. Here is what I tried but it did ...
My 5505 running 9.2(2)4ciscoasa(config)# sh verCisco Adaptive Security Appliance Software Version 9.2(2)4Device Manager Version 7.1(3)Compiled on Tue 29-Jul-14 22:39 by buildersSystem image file is "disk0:/asa922-4-k8.bin"Config file at boot was "sta...
Thanks for your input; it was the best I could come up with too. Not to say there is anything wrong with doing bridge-group if thats the only way. I was just hoping there was some new Cisco advancement that could do a better job then an 18 year old...
