Hi All , I build a SDWAN lab in eveng community . Now I am facing some uses while practicing . Like suddenly my Nodes are getting disconnected and I am unable to login . after that eveng web portal also not opening until I restart the VM. also ...
Hi All I have build my SWAN lab in eveng just to practice some basic stuffs . I am trying to install manual certification in vbondthrough xca , but i am encountering this error every time . I am using quite old IOS 16.2.11 as I dont have smart a...
Hi All ,Recently I came to know about the Sandbox lab for SWAN from one of my friend . While doing a bit of searching on this I realized this Always-On (AO) box and administrative access are restricted , as this is shared by multiple users at...
Hi All ,Recently I came to know about the Sandbox lab for SWAN from one of my friend . While doing a bit of searching on this I realized this Always-On (AO) box and administrative access are restricted , as this is shared by multiple users at ...
Hi All ,
I have a doubt regarding aaa authorization command . I have logged in to the Device using my TACACS ID now I removed the aaa authorization command specifically
no aaa authorization commands 15 default group tacacs+ local
Now Initially I...
Module number means slot number or card number .On some router or switch you can add additional line cards for examplein slot 0 , slot1 , slot2 you have added three line cards all total .now for example slot 1 have 24 gig ethernet ports in th...
When We talk of traffic diversion we have to take two things into account inbound /outbound For inbound MED / As path prepending is the best way . Talking about outbound , its highly depends on the technology we are using .If you have both the r...
Yes in practical or live environment we generally use hsrp in LAN enviorment Which is helpful if there is any direct link failure in LAN side . But most often problem happens on WAN side rather than LAN side .
So for an Example If there is an ISP ...
