Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are installing outdoor AP's and need info on how high the 2506 mast mount antenna's can be mounted. Cisco says 10 - 15 feet. We are using the outdoor 1310 AP's to cover scanning of steel coils at our facility. The coils are mostly stacked 2 h...
I've got an AIR-ANT2506 external antenna mounted on the side of a metal building. Hand-held Teklogix scanners connect to the AP and scan material outside. What kind of coverage range can I expect from the AP? Also, what's the recommended height fo...
Connecting a dual-nic HP server to a 3750 stack works fine; activity on both ports. When I try the same on a 6509, only one of the nics comes up.Port config on 3750:interface GigabitEthernet1/0/8 description host switchport mode access spanning-tree...
We have a 256K WAN link that appears to be slow. As a test we sent a 8mb file from end-to-end which took 7 minutes. We tried different times of the day and it stayed around 7 minutes. I calculated that it should take about 1 minute. Stats from AT&...
We tried another transfer using a 1.8mb file. It took 5 minutes 15 seconds. In a perfect world I figured it would take 57 seconds. We then tried another transfer on a 973kb file and it took 2 minutes 26 seconds (perfect world: 30 seconds). It a...
