Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,Wondering if anyone has had issue with setting up a VPN as between 2 ASA as followsSite 1 ASA(Directly connected to Internet) -> Site 2 Internet Router HSRP address which is NAT to outside interface of ASA behind Internet router.Strangely en...
Hi there,I was wondering if anyone has come across an issue whereby one vlan id i.e 10 is not seen by ESX host vnic's but the vnic in this vlan 10 can ping the default gateway on the vlan 10. The vnic's see the ip range but missing the vlan id of 10....
Hi there,Wondering if anyone can assist me.I have 2 active sites (Site A and Site B), currently there are a number of vlans stretched between the 2 location via a layer 2 link. We are looking at a planned refresh and moving away from an layer 2 link ...
Hi there,I've a site to site VPN tunnel create with customer from local office. I'm concerned that the traffic on the tunnel in impacting the Internet bandwidth for the whole office. Is it possible to rate limit the bandwidth on the VPN tunnel. I've ...
Hi there,I'm currently in the process of looking at migrating from CSS to ACE. I'm looking for some advise on a suitable equivalent ACE model that matches what I have today.Currently I have a CSS 11503 which I don't believe is heavy utilized, is ther...
I tried that but lost connectivity on vlan 20SW1 - Blade swinterface FastEthernet0/10 description ** uplink to enc2 sw4 switchport mode trunk spanning-tree portfastendPort Mode Encapsulation Status Native vlanFa0/10 on ...
Hi Ryan,Will have a per of ASA's(active/standby) at each site.I want to stretch a couple of vlans between 2 locations over a L3 link. I'm thinking of using LT2PV3 to acheive this but wondering is any experience or test cases of this that I could wor...
Hi there,Thanks for replies to date.L3 link is provided by ISP. The 2 sites have a direct connection to the Internet via the ISP. So I have vlan x defined in both location but I have a requirement to have the vlan talk to each other over an L2 conne...
