Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After upgrading a WLC 5508 from code 8.0.133.0 to 8.2.166.0 the WGB changed their behavior.About every 30 minutes the WGB disassociate and seconds later they associate to the same or another parent.The WGB consist of different modells - for example A...
Hi allI'm going to configure two Catalyst 4506-E with SUP-7E for VSS, running cat4500e-universal.SPA.03.05.01.E.152-1.E1.bin and newest ROMMON.It is also installed in each one a WS-X4712-SFP + E.For the VSL I want to use a 10Gig port on the SUP and ...
Hi all,i have a ASA 5505 with SSC module.As far as i understand, the SSC module will function with the base-license.in this documenthttp://www.cisco.com/en/US/partner/docs/security/asa/asa82/configuration/guide/ips.html#wp1104578i read that:The IPS ...
Hi Rasika,
thank you for your reply.
unfortunately both options does not work, the issue is still the same.
But i took a look to the WLC-log, and this entry occures many times:
*apfMsConnTask_2: Aug 22 17:29:36.780: %APF-3-WGB_ADD_WIRED_CLIENT_FA...
Hi Leo,thanks for the explanation.I'm not sure how the port group knows that she should operate in performance mode. As far as I know is the oversubscribed mode the default.It is sufficient to put in one 10gb and two 1 gb transceiver per port group o...
