Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Friends,
I've the problem with headset of CP-3905. There is no Headset port.
If we need to use the headset. What's the compatible brand & model of the headset ?
Is it need to configure on CUCM or not for headset ?
Thanks
Hello Cisco Expert
I'm just installed vWLC with 120 Flexconnect AP and it working well. So, my customer ask me for the options of DR method when the single one die or can't be recover following with ;
1. Can we use vmware vmotion feature to live mig...
Hello Cisco Expert,
Due to I've the CUCM connect to SIP trunk to Voice gateway. My customer need to migrate some IP Phone to their standard CUCM (The new one, new supplier) on another place..
I've 2 questions ;
1. Is it possible to use only one V...
Hello,
I've a problem regarding the HSRP setup between 2 room. I'm setup hsrp between two 3750 switches with over interface vlan.
I'm test with shutdown 3750 in server room 1. The 3750 in server room 2 are active. but the 2960s switch from server roo...
Hi,
I'm facing the issue about hunt pilot on CUCM9.x
My CUCM version : 9.1.2.12901-3
Problem : Initial announcement not heard (Silence during announcement playing) by external callers, for internal is working. I'm already check with ITSP they're not...
Hello Cisco Expert,
Is there anyone comment on this?
- Configuration is OK ?
- Firmware is OK ?
- Topology is OK ?
Thanks Leo, interesting on the firmware.
But, I'm thinking about the topology, don't sure the current is good or not ?
Hello Leo,
Thanks for your replied,
The correct date are ;
Jul 20 06:32:51.191: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x12F04EC, alignment 0Pool: Processor Free: 481520 Cause: Memory fragmentationAlternate Pool: None Free: 0...
Dear Leszek Wojnarski
Thanks for your help !
I've raised this issue to Cisco TAC and this issue is CUCM bug.
The solution from TAC looks as your script.
Now problem solved.
Thanks again !
SK
Hi,
Does anyone know the TAC script ?
I found something wrong from my ccsip trace ;
Jun 14 2016 05:44:22.155: //53656/20F79648B21E/SIP/Msg/ccsipDisplayMsg:Received: SIP/2.0 404 Not Found Via: SIP/2.0/UDP 10.35.16.5:5060;x-route-tag="tgrp:PSTN";branc...