Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, If u r not able to ping the IPS from ur machine , then u directly connect ur machine to the IPS command&control interface. Then U should ping and after that U can access the IPS , but JAVA must be installed on ur machine to access the IPS.Also u ...
Hi, You need to apply these commands for authentication & authorization on the router/switch and ACS server. aaa new-modelaaa authentication login default group tacacs+ localaaa authorization config-commandsaaa authorization exec default group tacac...
Hi, You r talking about pix 515 and u haven't mentioned the pix ios version. If pix ios version is 7.x series then it only support RIP and OSPF as dynamic routing and if PIX ios is 8.x series then it supports RIP,OSPF and EIGRP also. Till BGP is not ...
Yes, You can set the telnet password also through CLI as follows--Asa(config)#passwd ciscoHere I have set the telnet password -- ciscoAlso U can see in the running-config. The command is --Asa#sh run | i passwdI think it will helpful for u .....
