Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone,I am facing a strange problem on the core switch of my network. I have a Device in VLAN 1 directly connected to the core and fully reachable (IP 192.168.0.214) to which i want to redirect the traffic of VLAN 4. I created access-list 10...
Hello Everyone,Can i terminate one 512 Kbps ISDN Link on the HWIC-4B-S/T or do i need to multilink four 128 Kbps links to get 512 Kbps..Kindly suggest...RegardsRohit
Kev,This essentially means that the NBAR is not able to 1)either recognize packets coming in2)or see packets coming in But why would'nt it recognize, it should do so, unless there's some bug, which is very unlikely, so moving to the next causeDo you ...
Hello,The reason that you are able to see only some protocols with NBAR is because NBAR is not able to recognize other protocols you may be running and that's because you do not have PDLM's or Packet Description language Modules installed for other P...
Hello,I Dont think you would require the WIC-1DSU-T1 card i guess a WIC-1ADSL-DG Card is the one u need (If going for an ADSL Connection).I cant really help you with the configuration but here's the Link that can help you out i guess.http://www.cisco...
Hello Carl,Addressing is not required in the PPP frame and thats because Link Layer addressing is not required on Point to Point link as such. Ethernet requires it because it is essentially "Multiaccess", which means that a number of nodes (PC's, Rou...
Ok, i was actually testing and meanwhile a lot has been posted, but i have a workaround to this problem but there's a catch, but first let me tell you the solution. I have simulated the entire configuration and dont see the 4.2.2.1/32 route either, d...
