About LegInfoSvc

LegInfoSvc · 04-27-2021

Greetings all, I tried searching and couldn't find a solution so I thought I would ask for assistance. I have a 9800-L that is replacing some old 5508's. I am trying to duplicate the RADIUS config and running in to an issue where it seems the WLC is ...

LegInfoSvc · 08-05-2021

Hello Cheng. I was able to resolve this problem with assistance from Cisco TAC. I hope this information helps. I ran a couple commands that may help you, the following was from the case notes:Adjusted MAB behavior with these two commandsmab request f...

LegInfoSvc · 04-28-2021

Yes, using PSK with MAC filtering enabled

LegInfoSvc · 04-28-2021

here are a couple screen shots. version is 17.03.03, I just upgraded yesterday to fix an issue with the MAC delimiter in the global radius config changing back to comma no matter what I selected. that issue was resolved by the software upgrade

LegInfoSvc · 04-28-2021

I went into the RADIUS server config and re-entered the shared secret, and I have tried "Clear Text", "Encrypted" and "Hidden" to no avail. I also tried changing the MAC-filtering setting in the RADIUS server group between "None", "MAC" and "Key" and...

LegInfoSvc · 04-28-2021

Thank you Patoberli. Looking at the decrypted capture, it looks like the WLC is passing the MAC Address as the password (in addition to the username) so I have clearly configured things improperly. Can you tell me where I should go to change this?Tha...

Member Since	‎08-07-2018 01:25 PM
Date Last Visited	‎08-11-2021 12:09 AM
Posts	6

User Statistics

User Activity

RADIUS not working 9800-L with Windows NPS

Re: RADIUS not working 9800-L with Windows NPS

Re: RADIUS not working 9800-L with Windows NPS

Re: RADIUS not working 9800-L with Windows NPS

Re: RADIUS not working 9800-L with Windows NPS

Re: RADIUS not working 9800-L with Windows NPS