Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We've got this 1921 we're about to deploy into an existing DMVPN setup. We had that issue where the configuration below "line con 0" has "line 2" and had a "no exec" option we did not recall manually configuring. This prevented us from being able to ...
We are having the same issue. %PLATFORM-4-ELEMENT_WARNING:Switch 1 R0/0: smand: 1/RP/0: limited space. current usage of flash is only 70%. Was there any resolution? We are using Denali 16.3.3 on our 3850 stack of two switches.
according to the Cisco results when searching this command, they are used by NHRP on the spoke to advertise the spokes NHRP mapping to the hub. It says it decreases the need for more command-line-strings on the hub by a large number that would be req...
Reza, I have a stack of 4 Cisco 2960X currently in production and working. My boss wants me to add a 2960S (which is limited to 4 switches per stack) to this stack making the total number 5 switches.
I started the process of provisioning the 2960S a...
I have this issue and when i reset as instructed above, i still cannot set boot preferences within the AP. I cannot enter global configuration mode of the AP. All of these attempts are met with ERROR!!! Command is disabled. I have the newest ".tar" f...
