Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm contemplating on using c1941 (upgrade the RAM to 2Gb) as a pure BGP route server.Does anybody know if the router has sufficient CPU horsepower to handle at least 50 BGP peers with around 20,000 prefixes (in total)?Thank you for helping.ChunSin...
Hi,I've configured N7K to export layer 2 flows. Using 2 different flow collectors (open source and commercial), gaps/drops in the reported traffic are observed on a periodic basis. Problem doesn't seems to be with the exporters, hence I wondering if ...
Hi,I'm trying to create a static NAT for an outside server to access an inside serverstatic (inside,outside) a.b.c.d 1.2.3.4 netmask 255.255.255.255Xlate table shows that static NAT took placePacket capture shows the destination IP address becomes 0....
Hi Ameya,Yes, I've exported and graph on 2 different monitoring tools. It is shown in the white (pmacct/cacti) and black (Plixer Scrutinizer) background graphs. The Plixer folks couldn't figure out what could be the problem as well.Kerk Chun Sing
Hi Jorgemcse,Thanks for your assistance, the server is listening for radius on 1645/udp rather that tcp. As suggested I've verified using netstat.In fact, I've done a permit ip any-any which should include all udp and tcp packets, but server is not r...
Hi, have checked my acl and is same as your suggestion--------------access-list outside_in extended permit udp object-group EJPROXY_SVRS host a.b.c.d eq radiusobject-group network EJPROXY_SVRS network-object host network-object host ---------------D...
