Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am working on determining a possibility of sending the output of the command "show buffers input-interface vlan 4 header" to the syslog server. The problem we are experiencing is with some multicast applications in our network that send packets wit...
I use the Cisco VPN client to connect to a firm. I have a vendor that is providing me with a remote access solution for Cisco VPN client. The problem is that I have want to stay connected to BOTH VPN tunnels but the CISCO VPN client doesn't allow me ...
Hi,I am using a PIX 515 (its not 515E), it had two 32MB DIMM (=64MB RAM) and is running 6.2(2) ver PIX OS. I am planning of upgrading the OS to 7.0(4) and had ordered PIX-515-MEM-128.I removed the two 32 MB RAM DIMMs and installed the 128 MB one, but...
Experts,I am running into a routing issue with a dual-home BGP setup with HSRP. I have two ISPs (ISP-A & ISP-B) and I'm following the setup showed in http://www.cisco.com/en/US/partner/tech/tk365/technologies_configuration_example09186a0080093f2c.sht...
I find the statement "nat (inside) 1 192.168.43.0 255.255.255.0 0 0" when you already have "nat (inside) 1 0.0.0.0 0.0.0.0 0 0". Though this should not be a problem, you don't need it. Have you tried to ping 203.131.103.177? Source your ping from the...
Guys, I figured out the solution. To upgrade from 64MB to 128MB, you will have to install 2 * 64MB in the PIX. You cannot install a 128MB dimm, I am not even sure if there exists one because the one I got originally were 64MB and not 128MB which is w...
Thank you for your response Franco. My PIX has a Unrestricted (UR) and Failover (FO) licenses, which was the reason I ordered the PIX-515-MEM-128= DIMM. I was confused by the note Note Do not install a 64 MB DIMM in a PIX 515. You will not be able...
