Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have bought and installed a 2048bit certificate from Thawte on a ACE20-MOD-K9 module. The appliance can't use it and gives the following error: "This certificate cannot be verified up to a trusted certfication authority."I have contacted Thawte...
Hi, we have two offices connected with a lan-to-lan ipsec tunnel. My question is about one of the sites.At the site a Cisco 870-series router is used for connection to the internet and setting up the tunnel. Two subnets exist, 172.22.x.x and 10.30.x....
Hi, I have a 3750 switch with the following config on its ports:interface FastEthernet1/0/33 description VoIP Phone & PC User switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,100 switchport mode trunk switchport voice vlan 100 swi...
Hi, I'm troubleshooting a network consisting of 6 switches connected with fiber in a ring topology.Some users in the network experience temporary lock-ups on their pc's, but they are al located in the same area of the building. Users in other parts o...
show running-config -Building configuration...Current configuration : 4789 bytes!! Last configuration change at 14:21:38 UTC Wed Sep 7 2011! NVRAM config last updated at 14:17:55 UTC Wed Sep 7 2011!version 12.4no service padservice timestamps debug ...
Hi marwanshawi,That's what I'm trying to accomplish and what I thought the above configuration would do, but it doesn't. As far as I can tell from the logging, packets get the source ip from the external atm0.1 interface but do not get routed onto th...
That could be an issue, I know MAC-addresses can only exist on one port simultaneously but didn't realize learnt/dynamic mac-addresses are not automatically removed when inactive.I have now configured the aging time from the default value of 0 to 5 (...
