Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
we intend to upgrade image for WS-C4507R+E from IOS 03.03.02.XO to IOS 3.6.6E. But we have read review about this IOS at following link:
https://software.cisco.com/download/release.html?mdfid=284867339&softwareid=282046477&release=3.6.6E&flow...
Hello all,
We are a campus environment. We just introduced small port switches(8 ports & 16 ports---c2960 model). Since when we inducted these switches, we are getting MACFLAP errors on trunk link. We have same config. on uplink. This error is only o...
How can we make a cisco access point(2702) to broadcast single ssid. We have 5508 wireless lan controller in our environment. We have created 7 SSIDs. We want to broad a particular AP to broadcast single SSID...Thanks
Hi Mark,
Thanks for your note.
Actually I am planning to upgrade from 3.3.2 to 3.6.6E. I was just going through material about it and i read the review about it. These review are being attached here.
Thanks
But there is no increase in CPU level of either switch if there is L2 loop( less that 25%).
We have switch to which only one small port (8-port C2960) is connected. and that is also behaving same.
Apr 26 18:51:38: %SW_MATM-4-MACFLAP_NOTIF: Host b8c...
thanks for your reply.
g1/0/39 is providing uplink(trunk port) to small port sw. and g1/0/41 is providing another trunk to another small switch. g1/0/49 is uplink of this SW to distribution SW which has port channel config with core sw. Port channel...
