Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,I have merged two different organization dashboard with my email id, i can see both dashboard, but unable to switch from one dashboard to another, How i can do the same, Please support.RegardsMohit Dhanjal
I have a problem, a client does not have a dhcp server in the network and I need to configure an ap Meraki, I want to put static ip in the MR46 HW ap according to the guide: https://documentation.meraki.com/General_Administration/Tools_and_Troublesho...
Hi Team,I have Mr-46 AP connected in my current network, while Claiming different model(Mr-42) in same Network, I am getting error "Can not add MR42 device to a network running NBAR.Solution that i have checked if i want to add this AP in Current net...
Issue resolved, by setup a L3 Switch with DHCPsetup a L2 Switch with access port for the DHCP VlanWith the above setup I was able to access the AP's local status page in order to configure a Static IP, SSID broadcast with name "Bad-Meraki".
Tried, Same is working.But my Customer want to Create n new Network for incompatible access point in same Client Site.If i create new network and claim these AP in new network with same SSID and configuration and with Same PSK, will it work or create...
NBAR is enabled automatically. After disable Network Analysis, if i add the same, do i face any issue like Configuration issue and traffic analysis issue.RegardsMohit
