About carlos.asensio

carlos.asensio · 03-22-2009

Hi all,if you put a switch port in access mode, and you assigned it to a nonexistent vlan, the switch will create the vlan, like this:SW1(config)#int fast 0/1SW1(config-if)#switchport mode accessSW1(config-if)#switchport access vlan 12% Access VLAN d...

carlos.asensio · 03-26-2009

Hi,that first option you described is what my ISP have configured.Do you know if the PIX 6.3 will do proxy arp on its outside interface for a static entry of a IP address which is not in the subnet of the outside?In my case, it's not working.Apprecia...

carlos.asensio · 03-25-2009

Hi leolaohoo,that's exactly what we were looking for!!I'll suggest the implementation of this workaround and I will post my results.Thanks a lot!Carlos.

carlos.asensio · 03-24-2009

Hi rpfinneran,thanks for your advice.We're now considering a new project to perfom what you suggested, but we don't know when can be implemented.So, the question I made it's a workaround while we don't move up from PVST to MST.Thanks,Carlos.

carlos.asensio · 03-24-2009

Hi bmcginn,Thanks for your answer.This is not exactly what we want.We want to avoid whatever VTP server to create a VLAN when assigned one of its ports (of the 6500s) to a non existant VLAN (due to an error typing the number) with the "switchport acc...

carlos.asensio · 03-23-2009

Hi all,thanks for your answers.I'll be more specifically: we have two 6500s, who are our VTP servers. The problem is that we have reached the maximum STP instances in our access switches (2960), which are the VTP clients. This limitation consist in 1...

Member Since	‎12-21-2007 06:25 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	9

User Statistics

User Activity

Creating VLAN with Switchport

Re: PIX ISP two subnets

Re: Creating VLAN with Switchport

Re: Creating VLAN with Switchport

Re: Creating VLAN with Switchport

Re: Creating VLAN with Switchport