Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,we are current running an MPLS network from service provider 1 across our Branch office network. we need moe redudnancy and are looking to add another MPLS cloud from service provider 2. How would we integrate service provider 2 onto the sa...
We have a Cisco ISR 3945E that came with 1GB (512MBx2) We need to bump up to 2GB so we purchased through our channel a 2GB module part# MEM-3900-2GB=. What we noticed is that the memory needs to be installed in pairs. the 2x 512MB work fine, but when...
All,Regarding root bridge priority, our current catalyst 4510 switch 1 is the root for all VLANs from 1-205. I need to pull all the even numbered vlans from core 1 and make core switch 2 the root priority for all the even numbered vlans. I know that ...
All, we've created the following internal networks and want to ensure that we correctly advertise with route summarization accordingly. What should the correct summarized route statement look like?Subnets30 /24bit user data/voip networks 10.122.[1-30...
we have about 900 employees within 30 departments and are working to segment the LAN. Our largest department is 75 users. Does it pay to create all 24bit subnets per department or subent it out further on Catalayst 4510R-E w/SUP6 in the core. Any adv...
Hi,I appreciate the feedback. I understand what you are stating above, however here is my dilemma. ISP 1 provided me with a private BGP AS# 65XXX to use for my locations. Provider 2 states that they cannot use the same private BGP AS# 65XXX within th...
we are using private addressing 10.10.X.X with that being said we can potentially create 30 + networks to accomodate employees and scale for future growth. I could see us doubling staff for our larger departments within the next 5 years so some /24 w...
