Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi ,When I create a bundle, both ports perform load balancing equally. However, in the bundle statistics, I can only see the traffic for one of the ports.In other words, if each port handles 5 Gbps, the total should show as 10 Gbps, but it's only sho...
Hello everybody,I want to activate the service for http redirect while authenticating the PPPoE user that I have terminated on my ASR9K router. What should be the configuration on the ASR9K side?
Hi everyone , I use the policy map below to limit the subscriber, but when I try to use the whole package or when the speed test is at full load on router, I see packet losses. Anyone know the reason? policy-map 20Mclass class-defaultpolice rate 20 m...
interface Bundle-Ether40description ## NN_BUNDLEmtu 9014load-interval 600I changed my load-interval config from 30 to 600s but getting same results. Also read from snmp from bundle is the same.The bundle constantly shows data for only one port.
sh int bundle-ether 40Thu Apr 24 19:21:41.078 GMT+2Bundle-Ether40 is up, line protocol is up Interface state transitions: 1 Hardware is Aggregated Ethernet interface(s), address is 00ea.bd68.8609 Description: ## NN_BUNDLE Internet address is Unk...
I'm considering only providing this guidance for a specific subscriber group. I have an existing dynamic template, but I don't want to break it. Do you have any ideas on how I can do this by sending a radius attribute for a certain subscriber?
Thanks .. i prepared configuration below , but i don't want to activate for all subscribers, i need activate from radius for specific subscribers. How can i do that?ipv4 access-list allow-acl10 permit tcp any 172.16.254.0/26 eq www40 permit udp an...
Honestly i have no idea how to do this. Is it possible to give an example for the first and second scenarios? (peak-burst size and prec/dscp for matching) Thanks in advance
