Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently configured Microsoft RADIUS to authenticate VTY users for our Cisco devices.The goal was to authenticate using Active directory domain groups. Everthing works great when we specify PAP as authentication method in RAS policy but when we try t...
We have Campus network consisting of 3 different areas.Just wondering if I can extend VLANS over routed OSPF Point to Point links through tunnel. All areas are equiped with 6509's with sup 720 with 12.2(18)SXD7b IOS connected over fiber backbone. VLA...
Looking for top notch network simulator that will support 6509's, 2950's, 2940's 3750's and 3560's. Any recomendations would be greatly appreciated.Thanks in advance.
I am doing some testing with IRB using 2 WS-C3750-12S switches. I have them connected using a point to point routed ethernet ports via multimode SFP's using OSPF as the routing protocol. They connect fine and all is well. We now need to bridge vlans ...
Core switches are connected by routed OSPF point to point links. There is no layer 2 connection between core switches so I am not sure how PVLANS will solve problem. Please see original attached Topology Jpeg.Thank you for your response.
Thanks for the quick response!When I set authentication to CHAP on Radius server it fails. Is there a command I need to set on the 3560 switch to force CHAP authentication?
