Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have problem with my OSPFv3 configuration. It send packets from PC to the next Router, also from the next router to his folowing router. I mean I can send packet from PC6 to R10,also from R10 to R1, from R1 to R3 etc...but when I try to send packae...
Hello, I have this small network:All the components are configured for IPv6. The routers are configured to use EIGRPv6 (that is my task). But...When I try to send packet from PC0 to PC1, it fails...I have tried step by step to send packets to check t...
Hello,I have issue with Packet Tracer. I am trying to make small Network with 4 routers, 2 PC and 2 Switch, configured to use EIGRP. For the purpose of that I have to make some test, which includes the loose of connection between some of the routers....
I thought I did...but I think I may found the problem...In the configuration process, while i was saying the router to use ospf I also told it to be in area 1. This I did to all routers without conform that I need to have several areas. After a chang...
Thank you for your reply! What "It could be because Router3 doesn't have a return path to PC6" means? I don't know what to check for in the routing tables...can you share any idea?
Thank you for the reply!Here are the following routing tables for the routers:R10:Router#show ipv6 routeIPv6 Routing Table - 15 entriesCodes: C - Connected, L - Local, S - Static, R - RIP, B - BGPU - Per-user Static route, M - MIPv6I1 - ISIS L1, I2 -...
