Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI'm using several Cisco Small Business ESW-520-24 switches connected to a C3550-12G switch. The C3550 has configured 2 VLANs. The ESW-520's are connected (Layer 2) using trunking to allow all 2 VLANs. Connection between ESW-520 and C3550 works f...
Hi AllI'm using a Cisco Catalyst 3550-12G running IOS 12.2(40)SE in a kind of lab environment. SDM template is default. Trying to configure ip policy route-map on an VLAN interface fails. Entering the command works fine (no error message). But ch...
Hi AllI'm trying to configure NAT on a Stick using a Cisco 881 router using Cisco Configuration Professional. Based on the Cisco document "Netwrok Address Translation on a Stick" (Document ID:6505) I run into some questions.1) The document states to...
Hi AllI'm using a Cisco 881 router with IOS version (Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)).This router is used to connect a remote site (/24 network) to the company main site via a sit...
Anyone seen this before and knows what it means?During booting a Cisco Catalyst 3550, after flash initializing is done (...done Initializing flashfs) the message/error "POST: Boot Loader Block NOT LOCKED: STATUS FAILED is displayed.
Hi AndrasWe started obsering this behaviour some month ago. It wasn't running well from the beginning. In the beginning, the ESW-520-24 lost communication to C3550 from time to time (several days communication was OK than it stoped). After upgradi...
Hi Balajee MuggallaI copied the relating part below:===========================================================================version 12.2service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime...
Hi cadet alainIP Service Image is installed (C3550-ipservicesk9-mz.122-40.SE.bin).Accoring to the command reference (http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_40_se/command/reference/cli2.html#wp8724564) the comm...
Hi AllIn the meantime I got VPN on a stick to work. However, one thing is still missing. For sure somebody here could help me with that.After the VPN Tunnel is established, I want to configure the Router from the remote location (10.10.62.0/24) usi...
