About accarda

accarda · 02-22-2019

Hello everyone,hopefully you might give me some idea on what to look for in order to solve this issue. I'm trying to setup L2TP/IPSec access on my 1841 in order to allow my Mac client to access it when outside.This is a second step of an already work...

accarda · 02-04-2019

Hi everyone,I have couple of HWIC-4ESW installed in my 1841, even though up to now I have used only the first installed on slot 0. Here below is the output from sh inventory:r0gw#sh inventoryNAME: "chassis", DESCR: "1841 chassis"PID: CISCO1841 , VID:...

accarda · 01-31-2019

Hello everyone,I have a weird problem with a configuration that I have done that I use for my home office setup.The setup is based on a 1841 with FA0/0 and FA0/0 both used for WAN, with 2 different ISPs; each interface is connected to a LTE/4G router...

accarda · 02-22-2019

Actually to add to this I have checked with debug vpdn for some error and I have got this portion of report, where it says some vendor issues. May be MacOSX L2TP/IPSec is not compatible with Cisco IOS ????? 7:37:48.841 CET: L2TP tnl 0100F:000070FD:...

accarda · 02-22-2019

Hi Deepak,those ports are correctly forwarded to the Cisco. Here is the sh ip access-list WAN output:Extended IP access list WAN10 permit udp any host 192.168.1.2 eq isakmp (31 matches)20 permit udp any host 192.168.1.2 eq 1701 (108 matches)30 permit...

accarda · 02-05-2019

Thank you Rick and I totally agree with you about the value of this community.Even though I registered only last week, however I was able to solve many of my doubts about several things that I wanted to implement in my config by searching and reading...

accarda · 02-04-2019

Thank you Richard to point that post out.I would not have guessed that the second card would have needed such setup to work, good to know.Armando.

accarda · 02-01-2019

Actually I did some test only by removing the tcp adjust-mss statement and this has mitigated the problem.Currently I turned WAN1 ON, let it working for a while with some intense activity (watched some 50 min video on YouTube) and on the 1841 console...

Member Since	‎01-31-2019 10:05 PM
Date Last Visited	‎03-01-2019 02:02 AM
Posts	9

User Statistics

User Activity

1841 authentication issues when creating L2TP/IPSec VPN for client access.

1841 and 2 HWIC-4ESW cards, the one on slot1 not sending data.

1841 and weird problem with dual WAN setup.

Re: 1841 authentication issues when creating L2TP/IPSec VPN for client access.

Re: 1841 authentication issues when creating L2TP/IPSec VPN for client access.

Re: 1841 and 2 HWIC-4ESW cards, the one on slot1 not sending data.

Re: 1841 and 2 HWIC-4ESW cards, the one on slot1 not sending data.

Re: 1841 and weird problem with dual WAN setup.