Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I have 20 locations with more than 100 APs and a few with around 500.My objective was having 2xHA 5520s for the Locations where I have 500+ APs and have on remote locations Flexco Wireless and Mobility nnect APs.I came across some Cisco documentat...
Hello everybodya few weeks ago I faced a major breakdown in the network because of a failure on the DHCP server.After a unpredictable power outage the APs came up and they couldn't contact the DHCP. Because this service is controlled by another team ...
Hello.I've been hired to perform a report of a wireless site survey, and I'm wondering if it should include the credentials for access points and cisco controller.I couldn't find this information online.I've another concern about the power settings ...
Hi Hydn thank you for the reply, I'm aware of that matrix but I cannot find why I should use Flexconnect over Local mode because I have all my services centralized and relying on the redundant WAN Link. Why I can't have simply APs in local mode, nor...
Hi Flavio et al. I agree with the DHCP is better approach, although in some cases that we do not control this server is fast if we set the IP to static for a while.Unfortunatelly Cisco Prime doesn't have that option and that's why I opened this threa...
Hi Leo.so If the worst client is around 20mw, should I center the survey to 10mW? I suppose with half of the worst client, I cover all the scenarios, ensuring that all clients will have connectivity.I will use ekahau for the survey, I'm still beginne...