Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a WS-C3560-48PS-S V07 The firmware on it now is c3506-ipbask9-mz.122-55.SE8.bin The latest is c3506-ipbask9-mz.122-55.SE10.bin
What (if any) is the difference between SE8 and SE10?
This is my ongoing tale from: https://supportforums.cisco.com/discussion/13054711/wrong-mode-button-push Yes, this is my first time using a real switch.
I managed to get into the switch, and do "something".
With TTY (Minicom, Linux) I got it to ask ...
I held the mode button wile powering on, until everything stopped blinking. Now the SYST light just keeps blinking. It looks like a pattern, but I don't seem to be able to discern it.
Catalyst 3560 series PoE-48
WS-C3560-48PS-S V07
Just got it last ...
I have before, but changed it. So, this time blank user and [********] for the password.
P.S. I'm going thru the CCNA course work. Right now I'm on https://www.cybrary.it/video/layer2-cisco-ios-lab-part3/
P.P.S. I found one other free online course ...
If ether of you feel like being nice, could use more (basic) help
https://supportforums.cisco.com/discussion/13056766/getting-started-ws-c3560-48ps#comment-11456336
So, got something... but I'm not sure what.
en
conf t
interface vlan 1
ip address 192.168.1.35 255.255.255.0
no shut
!
!
Line vty 0 4
password [********]
exit
exit
Web browser to 192.168.1.35 and entered the password. Would not accept the passwor...
Ok, I just started to do:
conf t
interface vlan 1
ip address 10.1.1.1 255.255.255.0
no shut
!
!
Line vty 0 4
password (chose anything)
and it will not take the command "conf t"
Ok, that part I understand.
But my pfSense router, and all other systems, are in the 192.168.1.X range. So, I can change the 20 odd systems, or the switch.
How can I get the switch to 192.168.1.35?
