Hi Guys,
We have a branch office, there are several APs which are working in Flexconnect mode. Corporate SSID is bridged locally, others are tunneled to the WLC. APs reach WLC through a S2S VPN tunnel created between central and branch firewalls.
The...
Hi Guys,
I have an AIR-AP1562I access point which was used in a 9800 WLC, so the software on this AP now is Capwap Catalyst software version 17.6.4.56. I would like to convert this AP back to AireOS software, I would like to use it as Mobility Expres...
Hi Guys,
I have an AP in a production network that can't connect to any WLC after deployment. Image download from controller was successfull, but it got "Max retransmission count exceeded, going back to DISCOVER mode." error message during CAPWAP Con...
Hi Guys!
We have an installation where the following commands were not issued at the beginning of the configuration:1. key config-key password-encrypt (key)2. password encryption aes
Consequently, except for user passwords, all passwords/secret/keys ...
Hi Guys!
Freshly deployed wireless system gone into production 2 months ago. We have 2 piece of 9800 WLCs in HA SSO deployment model. Unfortunately the licensing level was not set on startup, now I would like to set it up. As I know, after changing l...
I downloaded the webauth bundle from Cisco site for my controller that contains a readme file states that the wlc can send these data to the RADIUS server.
Quote from the readme file:
WLC Passthrough with Email
This is an example custom webauth bundl...
Hi,
I would like to archieve the same what g.peart would like but that discussion you linked is not available. (I have 3504 wlc, not vWLC)
Could you add any information about how can I do that?
Thanks!
The AP know the WLC IP by: manually configured
There is no NATing device on the path between APs and WLC, there is L3 connection between them.
Traffic is allowed between APs and WLC. As I wrote, it works perfect, until the VPN tunnel between firewall...
In the examples I don't tried to use the /reload option, and that was the key for the solution.
I used this command to convert the AP back to AireOS software:
"archive download-sw /reload tftp://<IP ADDRESS HERE>/ap3g3-k9w8-tar.153-3.JK9.tar "
