Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,The problem experienced on Windows 7 machines is the following:When they connect and authenticate successfully, they are repeatedly redirected to the authentication page and asked to reauthenticate.Any help?Thank you,Stratos Demosthenous
Hello,I have upgraded a NAC server pair from v4.1.3 to v4.7.2.Before the upgrade the upgrade the Cerified timer was working and all the clients were removed each day at a specified time.After the upgrade the timer is not working properly.Each day i h...
Hello,Our client has a network with 20 CAS pairs and 1 CAM pair all with v4.7.2.The wired users are all pass through NAC for authentication.We now want to implement the same setup for the wireless users. The client has a WLC 4404 with v6.0.199.For t...
I have an IDS-4250 that is monitoring 2 PIX firewall.If an attack is generated the IDS sends a shun command to both PIX.Is it posible to block only one of the PIX.If i use a second monitoring interface to manage the second pix would this help not to ...
Hello,WLC was a temporary solution until Wism been placed to the network so there is no need to furhter troubleshoot.Anyway since you doubt there is a problem with the WLC, have you performed such a setup and worked?If yes please post it in order to ...
Hello Faisal,I have switch to the CAM secondary appliance and the Certified timer is working fine now.I will check for DB errors and move back to CAM primary to verify.Thank you,Stratos Demosthenous
Hello,I have perform some onsite triubleshooting and it seems taht the problem is not with all Windows 7 workstations.The problem apperas only to 2 laptops(same model/brand HP Pavilion) with Windows 7 Home Premium with AVG and Kaspersky installed I h...
