About martin.daley@eventura.com

martin.daley@eventura.com · 08-30-2022

I have a very strange VLAN routing issue and struggling to get my head around what the issue could be.Topology as follows.Cisco Nexus Core and a series of Cisco Catalyst Edge/Access Layer switches.The access layer switches are connected via trunk por...

martin.daley@eventura.com · 04-03-2019

HI, Forgive me for this rather basic question but I am new to Cisco and currently getting to grips with a new MPLS configuration. I have the following configuration Head office--------------head office firewall LAN - 192.168.11.0head office firewall...

martin.daley@eventura.com · 03-21-2019

Hi, I am relatively new to the Cisco world and have been tasked with setting up a BT MPLS network! Yipee! I am in a position where I have the head office router configured, and a branch router able to ping our head office resources through our Watchg...

martin.daley@eventura.com · 08-30-2022

Nexus related port config as followsinterface Vlan224no shutdownip address 192.168.224.2/23 interface port-channel44description *** LINK TO REC1-3560-01 ***switchport mode trunkswitchport trunk allowed vlan 1,222,224,229,444,701speed 1000bandwidth 10...

martin.daley@eventura.com · 08-30-2022

hi, thanks for the response, to confirm, there is no firewalling between the Nexus and the Catalyst Access Layer, they are directly connected. With regards to firewall, this is on the perimeter and is a Fortinet appliance. The issue I seem to have is...

martin.daley@eventura.com · 04-03-2019

thanks, managed to get this working.We weren't advertising the routes into bgp so the branch networks at the other side were unsure where to route "unknown" traffic.Every day is a school day :-)

martin.daley@eventura.com · 04-02-2019

the following allows my branch office router to ping head office resources. I cannot however get a PC sat on the lan interface of the branch office router (currently on ip unnumbered loopback1 10.1.1.1) to ping head office resources. I think due to t...

martin.daley@eventura.com · 04-02-2019

HI, Thanks for the reply, I have a config very similar to the one provided but can't help but feel I am missing something. I think the last step is allowing the branch office to utilise the /24 subnet BT have provided to us but I can't see how this i...

Member Since	‎03-21-2019 02:18 AM
Date Last Visited	‎09-06-2022 10:22 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

Strange Issue with VLAN routing

Basic routing question web traffic back to Head Office Internet Breakout over MPLS

New UK BT MPLS network issues

Re: Strange Issue with VLAN routing

Re: Strange Issue with VLAN routing

Re: Basic routing question web traffic back to Head Office Internet Breakout over MPLS

Re: New UK BT MPLS network issues

Re: New UK BT MPLS network issues