About alfo208

alfo208 · 03-26-2019

Hello I am new with Cisco Configuration. we have 2 C2960XR-48FPS-I stack and we need to have Wifi, voip, server (DHCP) and internet and I need to have 8 different vlans for WAPS, Server, Access, Voice, etc, and all those vlans need to comunicate in b...

alfo208 · 03-27-2019

thank you so much for your help

alfo208 · 03-27-2019

Thank you, yes I have a firewall sonicwall will will do the translation, in my config I have a 2 port in the sw (stack) going into my fw Main and fw HA so in the SW I have a static route 0.0.0.0 0.0.0.0 10.23.200.1 which is the firewall.Now I did a t...

alfo208 · 03-27-2019

Thanks all for the inputs, I will do some tests and check the gateway on the device 10.23.99.250 (is a WANSW that I need to manage). But my main question is the sw C2960XR with that current config will fulfill my design needs to have Wifi, voip, serv...

alfo208 · 03-27-2019

this are the tests:PHSWCORE#ping 10.23.99.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.23.99.1, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/3 msPHSWCORE#ping 10.23.99.250Type escape...

alfo208 · 03-27-2019

Hello Rick, here it is:PHSWCORE#sho arpProtocol Address Age (min) Hardware Addr Type InterfaceInternet 10.23.1.1 - 7018.a77d.b144 ARPA Vlan231Internet 10.23.2.1 - 7018.a77d.b145 ARPA Vlan232Internet 10.23.3.1 - 7018.a77d.b146 ARPA Vlan233Internet 10....

Member Since	‎03-26-2019 02:00 PM
Date Last Visited	‎03-29-2019 01:34 PM
Posts	8

User Statistics

User Activity

C2960XR-48FPS-I as a Core/Access SW

Re: C2960XR-48FPS-I as a Core/Access SW

Re: C2960XR-48FPS-I as a Core/Access SW

Re: C2960XR-48FPS-I as a Core/Access SW

Re: C2960XR-48FPS-I as a Core/Access SW

Re: C2960XR-48FPS-I as a Core/Access SW