About mikehatton

mikehatton · 03-28-2007

I'm setting up an etherchannel group to our Lefthand Network SAN. Looking at the design of our 4510R switch and line cards, they are grouped into 6 groups of 8 to the fiber at 1G. Is there a best practice to achieve optimal performance for all server...

mikehatton · 08-11-2006

I have a VLAN that i do not want any other VLAN to have access to. This vlan is spread accross 2 external sites via t1. How can i make my 3725 Router not rout between my other vlans and the one in question?Thank you in advance!

mikehatton · 03-29-2007

I'm using the X4548-GB Line Cards and supervisor engin V. If i use 802.3ad doesnt' that in turn "increase" bandwidth to my equipment? I want to make sure I place the cables in the correct ports to get best preformace out of the switch

mikehatton · 08-14-2006

Great. Case closed! Thanks EdisonOrtiz!

mikehatton · 08-14-2006

I get a "Destination net unreachable" when trying to ping now... Is that the desired reaction?

mikehatton · 08-14-2006

No, i do not have int fa0/1 available. I tried no ip route-cache and also debug ip packet 154 detail and i didn't see anything come through

mikehatton · 08-14-2006

Thanks EdisonOrtiz, I applied the following config changes but still can pin an ip address in this subnet from my workstation in another subnet. What am i doing ront. i used a subinterface of fa0/0access-list 154 permit ip 10.83.0.64 0.0.0.63 10.83.0...

Member Since	‎08-11-2006 09:50 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	15

User Statistics

User Activity

etherchannel bandwidth

Restrict Inter-VLAN Routing

Re: etherchannel bandwidth

Re: Restrict Inter-VLAN Routing

Re: Restrict Inter-VLAN Routing

Re: Restrict Inter-VLAN Routing

Re: Restrict Inter-VLAN Routing