Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I am wondering about having a controller act as both a foreign and an anchor.Currently we (Corp A) have an agreement with Corp B to broadcast each others WLANs. We have an anchor (Cisco 5508) for SSID A in a mobility group with Corp B controll...
Hi folks,I have spent the last couple of days trawling SL documentation but have failed to find the instructions to do this.All but two of our 9300 switches worked with Smart Licensing Compliance via DNA Center. The two that failed said:Provisioning ...
Hi. I am pretty new to DNA Center so I am not always sure where to look when things don't work, so looking for a bit of advice. We have started to update switches through DNA SWIM. So far, the 9300s have had no problems but we have tried numerous tim...
Thanks for the response M.What I am a little confused about is the doc says "You must not use the Export Anchor setting, for any policy profile tied to a WLAN profile on a controller with access points. This prevents the SSID to be broadcasted, so th...
I have exactly the same problem as the OP and the "Force Configuration Push" solution did NOT work for me. I still see:%DMI-2-NETCONF_SSH_CRITICAL: Switch 1 R0/0: ncsshd_bp: NETCONF/SSH: [pid(30457)] fatal: mm_answer_sign: Xkey_sign failed: error in ...
Thanks pieterh for the feedback and pointing to the documentation.All 9300 switches (both working and not working) are currently running 17.6.4 and are all 9300-48P models.Unfortunately when running the command you suggested on one of the failed swit...
It worked!Thanks PabMar. Manually replacing the certificate and trustpoint did the trick. Successful distribution and activation of the 2960x.Much appreciated,Andy
