Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,I have 2 Cisco routers conencted to a Cat3550-24 via Fa ports.On RT1 I have:interface FastEthernet0/0.1 description vlan1 Management encapsulation dot1Q 1 native ip address 172.16.1.3 255.255.255.0 secondary ip address 192.168.1.250 255.255....
Can anyone help me with the usage of the Cisco DIal Out tool in combination with a C3620-BRI8B-S/T. What I need is config for the C3620.ThnxIDJ van der Ven
I have the next situation:1 * Cisco 3620 (R4700)-24576K/8192K-IOS:c3620-is-mz.120-17a1 * cisco WS-C2950-24 (RC32300)-20402K-IOS:c2950-i6q4l2-mz.121-11.EA1I want to setup a TRUNK between the 3620 and the c2950. The problem I face is: I am only able to...
I want to establish the next thing. I am using the Cisco Dial Out tool to make a COM connection via TCP/IP to an access server 2503 with an ISDN interface.The problem I face is that I can not access the access server via poort 6001. If I do a port s...
Can anyone help me out:I want to build a Client VPN session thru 2 firewalls. The first one is the Company (co) firewall the other one is the customer (cu) firewall. (co) (cu)PC-->LAN-->PIX-->WAN-->PIXRgds.Indra...
Hi Roger,Yes, I had the same idea, cause I knwe the command from previous IOS versions and thought it was resolved by the latest IOS versions (12.2(xx) >). So did not used it, but I tried and it solved the flapping problem.Roger I want to thank ya fo...
Roger,Solve the problem (part of it), I use the :standby use-bia command on the on the sub fa interfaces. Would like to thank ya all (spec. Roger).THNXIndra
Hi Roger,I will do that tommorow, cause I am heading home. It is strange, this the first time I encounter this problem. Do I have to configure also the actual interface on both routers? the Fa0/0 and Fa1/0 interfaces?talk to ya tommorow!Rgds.IndraDEB...
Roger,Ok I've done some cli work and come up with the next config:RT1:interface FastEthernet0/0.1 description vlan1 Management encapsulation dot1Q 1 native ip address 192.168.1.250 255.255.255.0 ip helper-address 172.16.20.11 ip helper-address 172.16...
