Hi,See attached .TXT document for diagram & configs !!!We have a scenario were we have dual homed links from the Access layer (single router) to our Distribution layer (dual routers).Problem is voice traffic does not sound good over these links (brea...
Hi,Can someone please provide me with information on IS-IS interdomain routing, also refered to as L-3 or IDRP. Basically IS-IS routing between different Domains or Autonomous Systems.Links etc would be appreciated.Thanks in advancemips
My problem is that I have to implement private vlans but the switch 5xxx does not support it.Is their any other way to achieve a similair results (with L2/L3) as when using PVLANs ?
Hi,Please help. Can you install Unity on a Windows 2003 Server or does it have to be installed on 2000 Server ???My understanding of the text below is that it cannot be installed on 2003 but you can integrate with 2003 AD ???What does OFF-BOX mean ??...
Why does the port that an aironet access point is connected to on a Catalyst 5505 with WS-X5012A blades go into Error Disable mode if you disconnnect and reconnect the aironet AP ?The AP is hard coded for 10Mb/s Half Duplex & the switchports are conf...
You want a PA-MC-8TE1+http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091c34.htmlThis is the replacement for the PA-MC-8E1 which is EoS.
I did not look at the card descriptions but from what I can tell the one card is a E1 card and the other a normal serial card.The electrical specifications between the two cards are totally different and they cannot interchanged unless you use some e...
You could do one of two things.Configure 802.Q trunking between the switch & router on the existing with subinterfaces on the router port.Alternatively use the second ethernet port on the router for the other subnet.regardsmips
