About Denson

Denson · 04-14-2019

So i've recently bought a CS-2960-S and tried upgrading it. Since uploading the lastest firmware using TFTP kept failing near the end i've decided to delete the running firmware folder (c2960-lanlitek9-mz.122-50.SE4) from the flash.After that uploadi...

Denson · 04-17-2019

just tried booting from: c2960-lanbasek9-mz.122-55.SE.bin same message: Checking for Bootloader upgrade.. not neededError: *** Unsupported platforms ***Error: hardware not supported by firmware.Try loading newer software instead.System Resetting.. i...

Denson · 04-16-2019

Uploading firmware was succesfull, booting from firmware results in following message:Checking for Bootloader upgrade.. not neededError: *** Unsupported platforms ***Error: hardware not supported by firmware.Try loading newer software instead.System ...

Denson · 04-16-2019

uploading the firmware as we speak, fingers crossed! Thanks for helping out.

Denson · 04-15-2019

I'm not sure what you are trying to say. 'c2960-lanlitek9-mz.122-50.SE4' was running on the switch when it was still working. only after removing this firmware and trying to boot from 'c2960s-universalk9-mz.152-2.E9.bin' the problems started. This is...

Denson · 04-15-2019

Thank you for your advice. It seems i'm getting stuck at booting from the new image. Uploading the image using xmodem worked just fine. The following message is now for over 30 minutes in my terminal:'File "flash:/c2960s-universalk9-mz.122-55.SE13.bi...

Member Since	‎04-14-2019 11:43 AM
Date Last Visited
Posts	6
Total Helpful Votes Received	1

User Statistics

User Activity

Restoring C2960-S

Re: Restoring C2960-S

Re: Restoring C2960-S

Re: Restoring C2960-S

Re: Restoring C2960-S

Re: Restoring C2960-S