Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a SonicWall NSa 3700 firewall, Tripp-Lite KVM, and Cisco SG350XG-24T switch. I connected my Cisco switch OOB port to one of the firewall interfaces and the Tripp-Lite KVM to two firewall interface using Transparent IP Mode (Splice L3 Su...
Hello, I am running FMCv for the first time on Hyper-V using the Microsoft Azure VM. The web interface prompted me to choose between registering the device with Cisco Smart License Manager or Start a 90-Day trial. I will select the 90-Day trial for n...
Hello, I will be setting up vFMC 7.0 for the first time to configure my ASA 5555-X reimaged with FTD 6.6.5.I will eventually have a dedicated VPS for the FMC. However, at this stage I'm looking for a temporary setup that will allow me to get started ...
Hello, I added an ASA 5555-X with FTD appliance to an existing network in transparent mode. The device cannot be configured with FDM because it is in transparent mode which is not supported by FDM. I currently don't have FMC. So the only option I hav...
Hello everyone,Thank you all who followed up on my post. I managed to resolve this issue simply by adding the public IP to the native VLAN instead of adding the IP into a newly created tagged VLAN.Hope this helps whoever stumbles by the same issue.Be...
I did as you said except for "switchport mode access" which I replaced by "switchport mode trunk" as I have tagged VLANs. When I used "switchport mode access" I lost connectivity to all devices connected to the switch. They only work the trunk mode.A...
Correction. Assigned 60.61.62.22 to interface 6. I can't ping 60.61.62.22 from the switch itself, let alone from outside. I also cannot ping any outside IP from the switch. I can, however, ping to/from all the devices connected to the switch. Followi...