Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a bit of a problem with IP device tracking on my switches, it doesn't always work. For whatever reason the switch sometimes never registers the IP unless I clear the arp entry from the core and force a new arp to be generated with a ping, thou...
We somewhat recently rolled out 802.1x in a closed mode across the organization. Our Desktop team wants to be able to PXE boot devices and reimage them without having them need to be in a staging area. So far we have facilitated this by just logging ...
I am having never ending problems with my DMVPN tunnel protection setup. It started with the spokes not recognizing the tunnel as down, I couldn't find a way to do keepalives or DPD. Then I started having issues where the tunnel would just stay in NH...
Which is not the command you sent.Here is a link to a doc explaining how IPDT works https://www.cisco.com/c/en/us/support/docs/ip/address-resolution-protocol-arp/118630-technote-ipdt-00.htmlIt clearly shows my commands. Additionally explaining that i...
Yeah I already run that. Check your show run all, you'll find something similar to my commands. Do a "show ip device tracking all" and you'll see source selection and probe delay times. If I didn't have device tracking on I would never be getting the...