Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Community
I have added/imported an ASA5500 Node on version 9.1.5 into CML however the node does not want to successfully start up. I have tried different setting under the node properties but to no avail. It seems to be in a boot loop. I need to r...
Hello Experts
I have a customer that has a Firepower Deployment and we have integrated into ISE using PXGrid. We have also created an AD Realm and integrated this via LDAP.
VPN authentication is making use of a Certificate and when a user logs on or ...
Hi Community I have a question with regards to the migration of ACS to ISE. Now I am aware of the process of migrating ACS 5.x to ISE2.x using the ACS-ISE migration tool. I also know that this migration needs to be done to a newly configured ISE serv...
Hi There Forum
I have a customer who has deployed ISE v2.3 in Low Impact Mode and is using Cisco 4500 Series Switches as his Access Layer. When a 802.1x client is connected to the LAN, the client is successfully authenticated and authorized and the I...
Hi Forum
I have a question regarding the licensing on a Firepower 4110 with an ASA Logical Device. The Logical Device is licensed by default for 10 Contexts. If I have 2 x 4110 Firepower Appliances both with ASA Logical devices configured in High A...
Hi InayathI see that both version 6.0(x) and 7.0(x) have already been replaced and are available for download on the Cisco Website. Surely the bug listing needs to be updated if this has been fixed?? I have read the release note for both of these maj...
Hi Jouni I am also not aware of them being VRF-Aware as yet and I do know that it has been a long time question - some dating back as far as 4 years back. I already have a distinct solution in mind I was just wondering whether with the new release of...
Hi ThereI presume that the other LWAPP AP's are working without any issues here and that the necessary VLAN, DHCP Option 43 and Code 241 (Windows DHCP) have been configured.Did the AP have a DHCP or statically assigned IP before the conversion?
Problem Sorted.The issue was with the certificate on the ACS device as well.Uploaded a new CSR to the CA, signed it and uploaded it onto the ACS. Also installed a new cert from the CA on the user machine and all is working now.
