Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Im using ASA 5516-X, and here is my version: ASA 9.8(4)25ASDM 7.12(1)SFR 5.4.1-211Java Version 8 Update 261 Im using Windows 10 PRO and Windows Server 2016 download ASDM and try to access. But there are error "ASDM was unable to load the fir...
For example my existing instance 1 (vlan 1-10). So I plan to create new VLAN 11. So can I create new instance instead add new vlan into instance 1. For example: - Instance 1(vlan 1-10),- Instance 2 (Vlan 11-new vlan)..So I apply instance 2 to core ...
Hi everyone, Now my existing APs (around 51 units) are connected to wlc 2504. And then I plan to add new AP (around 49 units) and new WLC3504. Im plan to take out the wlc2504 and running wlc 3504. What am i curious is Do I need to reset all 51 units ...
Hi everyone. Now my core switch 4507 are running firmware 3.9.2 version. After check the website, 3.8.7 version are recommended. So I try to upload to 3.8.7 version to my core switch. After reload, it cant up and go to rommon mode. After force select...
Hi Everyone. My 4507R+E switch now runnnig firmware version 3.9.2.. So I want to to upgrade to k9 3.9.2 firmware version becuase I want to enable SSH. So the question, how I want to ensure my license are supported k9?
For example my existing instance 1 (vlan 1-10). So I plan to create new VLAN 11. So can I create new instance instead add new vlan into instance 1. For example: - Instance 1(vlan 1-10),- Instance 2 (Vlan 11-new vlan)..So I apply instance 2 to core s...
I means the wlc is not configured as HA. So mean I need to configure IP address new WLC same with the old WLC. Then shutdown the old wlc and boot up the new one?
Now WLC is not configured as HA. Means after shut down wlc2504, then I just need to reboot the AP to make them join to wlc3504 instead go to one by one AP and press reset button?
Hi,After upload, i did md5. Everything normal. I follow this step,1. Upload new firmware2. check md53. boot system (new version)4. no boot system (old version)5. write memory6. Reload.After reload, suddenly core switch go to rommon mode. I force sele...
